A nice benefit of getting your security system set up by professionals is that you seldom find a reason to concern yourself with it. With that being said, there will likely be a couple situations where you have to reset your alarms in Plano. When using a smart command hub, your system reset usually takes a couple taps of the touchscreen when you’ve experienced common events like false alarms and battery changes.
Check Your Instruction Manual Before Attempting An Alarm Reset
A word to the wise before you try to reset your Plano home security system, check your manual first. You wouldn’t want to compromise your property’s defense as a result of touching a button in error. Also, the process might have changed if you upgraded from a numerical keypad to a modernized touchscreen interface. If there’s ever a time when you can't reset your system, don't worry as you can always contact your trusted security specialists.
Resetting Your Plano Home Security System Because Of A False Alarm
Usually, a false alarm takes place as a result of a sensor that was tripped by accident. You may utilize the control panel or open your ADT smartphone app and tap the shield option and enter your unique passcode to switch off the system in these situations. You might receive notification from your 24-hour monitoring specialists, but simply inform them that you had a false alarm.
Tips To Reset Your Alarm When Experiencing A Power Outage In Plano
When you lose power because of high winds or other factors, you may begin hearing a steady beep from your alarm’s central interface. This signifies that the alarm is using the battery backup. To reset your equipment and silence the beeping, you must disarm/rearm the system.
However, if power is out for an extended time, you may need a full reset of your system. Heed the directives in the instruction manual -- usually by putting in your PIN number and hitting the on/off button twice -- and you should be back to normal. You may still hear chirping caused by the secondary power source, as it might not cease until the battery charges entirely. Call your security technician if you continue to have difficulties with your ADT equipment at least 20 hours after power is restored.
How To Reset Your Home Security System After Changing A Battery
Occasionally you must switch out a battery within one of the devices in your security installation. To do this, you will switch your system to "Test Mode" so you prevent setting off an accidental alarm. Once the battery is replaced, change the system from test mode and resume normal operations. If the command center is unable to recognize the component or the battery light is still on, you may require a full reset of your security system.
Reset Your Plano Security System After Adding Or Deleting A Code
Adding and deleting users can be done on your ADT Command interface and your ADT mobile app. You won’t require a resetting of your system when deleting or adding users. With that being said, if you relocate to a new home with an existing ADT alarm system, you need to contact your residential security experts at (972) 357-1049 to start a new contract. The installation tech will visit your property to switch out outdated parts, install additional alarms or cameras (as required), and reset the system for you.
A User-Friendly Security System Is Only A Call Away
Attempting to reset a home security system in Plano can be a challenge if it fails to include clear devices and controls. If the time has come to get your intuitive home security system, call (972) 357-1049 or send in the form below. Our specialists are ready to design the right security system for your property.